Vilde Moltu 8/24/25 Vilde Moltu 8/24/25

Answering two of the most frequently asked questions

Vilde Moltu 6/6/24 Vilde Moltu 6/6/24

Cutting all tubing and casing on Sean Romeo Field for ONE-Dyas

Vilde Moltu 1/31/24 Vilde Moltu 1/31/24

Using 10-300 NTC (Nor Tubular Cutter) Cutting 9 5/8” Casing

Vilde Moltu 7/15/23 Vilde Moltu 7/15/23

Using 10-300 NTC (Nor Tubular Cutter) Cutting 2 ⅞” velocity string

Vilde Moltu 4/15/23 Vilde Moltu 4/15/23

Wintershall, Swift 10. 9 ⅝”x7” cemented.

Vilde Moltu 11/10/22 Vilde Moltu 11/10/22

Gullfaks C. Dual5" & 7" liners cuton surface.

Vilde Moltu 9/1/22 Vilde Moltu 9/1/22

Helix, Enhancer, cut 5 ½” tubing

Vilde Moltu 8/19/20 Vilde Moltu 8/19/20

Introducing a NEW Product from NorOilTools

NorOilTools launches a new product to the market, the Nor Pipe End Cap which is available in all customer specific sizes.

Vilde Moltu 6/24/20 Vilde Moltu 6/24/20

Significant improvement on Vigdis well E-4

Nor Tubular Cutter (NTC) was used to cut casing joints at surface.

Vilde Moltu 3/12/19 Vilde Moltu 3/12/19

First use of the NorOilTools Tubular Cutter for Equinor

NorOilTools installed their Nor Tubular Cutter (NTC) on a frame and connected hydraulic on Equinor’s Deepsea Bergen semi-submersible drilling rig, Huldra.

Vilde Moltu 4/18/18 Vilde Moltu 4/18/18

Trial Run with Repsol of the NTC

During tests, the Nor Tubular Cutter (NTC) was found to cut a tubular member in as short as 30-50 seconds.